Filter
Top Products
English - 33
OPERATION
Changing Channels
Using the Channel Buttons
Press the CH or CH button to change channels.
When you press the CH or CH button, the TV changes channels in sequence. You will see all
the channels that the TV has memorized. (The TV must have memorized at least three channels.)
You will not see channels that were either erased or not memorized.
Using the Number Buttons
Use the number buttons to quickly tune to any channel.
Press the number buttons to go directly to a channel.
For example, to select channel 27, press “2,” then “7.”
The TV will change channels when you press the second number.
Using the Previous Channel
Press the PRE-CH button.
The TV changes to the last
channel you were watching.
Using the “
-
” Button
The “
-
” button is used to select stations that broadcast both a digital and analog signal.
For example, for Channel 7 (digital),
press “7”, then “-”, then “1” and
you will see as left.
DTV CABLE
7
-
1
KYW-HD
HD
Picture Mode : Dynamic
Sound Mode : Custom
MTS : English
--
:
--
am
For channel 7-2 (analog), press
“7”, then “-”, then “2” and you will
see as left.
DTV CABLE
7
-
2
R
SD
Multi
Picture Mode : Dynamic
Sound Mode : Custom
MTS : English
--
:
--
am
Note
• HD indicates the TV is receiving a Digital High Definition signal. SD indicates the TV is receiving a
Analog standard definition signal.
BP68-00334A-00Eng 5/20/04 4:54 PM Page 33