Filter
Top Products
Operation
32
Channel Memory
Your TV can memorize and store all of the channels available. Once the channels are memorized,
you can use the CH and CH buttons to scan through the available channels.
Selecting the Broadcast Source
Before memorizing available channels, you must select what broadcast source your TV is connect-
ed to, either an antenna or a cable system.
1
Press the Menu button.
Move the joystick down to
select SETUP, then press the
joystick to enter.
2
Press the joystick to enter. The
channel setup menu will
appear. Move the joystick
down to select “Air or CATV”.
3
If you are connected to an
antenna, leave “AIR” dis-
played. If you connected
cable, press the joystick to the
right to display the type of
cable system: “STD,” “HRC,”
or “IRC.”
(If you are not sure which type
of cable system you have,
contact your cable company.)
Move Select Menu
Move Select Menu
BP68-00030A-3 4/15/05 8:31 PM Page 32