Samsung HLM507W Projection Television User Manual


 
Special Features
64
Selecting a Signal Source (Antenna or Cable) for PIP
If the PIP source is TV during PIP ON, you can select the broadcasting source of PIP picture sepa-
rately from the main picture. (If the main picture is ANT-B and the broadcasting sources are differ-
ent, making adjustments is necessary.)
1
Press the Menu button. Move
the joystick down to select
PIP, then press the joystick to
enter.
2
Move the joystick down to
select “Air or CATV”.
3
If an antenna is connected,
the setting is “AIR.” If a Cable
TV system is providing the sig-
nal, move the joystick to the
left or right until the appropri-
ate type of cable system is
displayed (“STD,” “HRC,” or
“IRC”).
4
Press Menu to exit.
BP68-00030A-4 4/15/05 8:34 PM Page 64