Filter
Top Products
Labeling the Channels
Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”,
“PBS2”, CNN1”, etc.) A label consists of four fields, where each field is a letter, a number, or a
blank. When the DISPLAY button is pressed, the channel label will appear next to the channel
number.
1
Press the CH or CH but-
ton to tune to the channel that
will be labeled.
2
Press the Menu button. Move
the joystick down to select
SETUP, then press the joystick
to enter.
3
Press the joystick to enter.
Move the joystick down to
select Labeling.
4
Move the joystick to the right
to begin labeling. (Each label
has four fields. See top para-
graph.)
Move the joystick up or down
to select a letter, a number, or
a blank. (Pressing the CH but-
ton results in this sequence:
A,B,...Z, blank,0,1,...9).
5
Move the joystick to the right
to switch to the next field,
which will be selected. Select
a second letter or digit using
joystick(up or down), as
above. Repeat the process to
select the last two digits.
Press the Menu button to exit.
Operation
36
Move Select Menu
BP68-00030A-3 4/15/05 8:31 PM Page 36