Filter
Top Products
English-17
You can store up to 100 channels, including those received via cable
networks. When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you
wish to identify.
1 Press the
MENU
button.
Result
:
The main menu is displayed.
2 Press the or button to select
Channel
.
Result:
The options available in the
Channel
group are
displayed.
3 Press the
ENTER
button
.
4 Press the or button
to
select
Manual Store
.
Press the
ENTER
button.
Result
: The options available in the
Manual Store
menu are
displayed with
Programme
selected.
5 Press the
ENTER
button again.
To assign a programme number to a channel, find the correct
number by pressing the or button and then press the
ENTER
button
.
You can also set a programme number by pressing number
buttons on the remote control.
6 Press the or button to select
Colour System
and then press
the
ENTER
button.
Select the
colour
standard required by pressing the or button
repeatedly and then press the
ENTER
button.
Result
: The colour standards are displayed in the following order:
AUTO - PAL - SECAM - NTSC 4.43
7 Press the or button to select
Sound System
and then press
the
ENTER
button.
Select the sound standard required by pressing the or button
repeatedly and then press the
ENTER
button.
Result
: The sound standards are displayed in the following order:
BG - DK - I - L
8 For all the channels to move to the required channel numbers,
repeat steps 5 to 7 after selecting
Programme
by pressing
the
or button
.
Storing Channels Manually
01 BN68-00905A-X0Eng.qxd 4/6/05 4:06 PM Page 17