Filter
Top Products
English - 69
Connecting CableCARD
OCAP is an operating system provided by your Cable company that provides interactive services such as Electronic
Program Guides, Digital Video Recording, Gaming etc. to enhance your TV viewing experience. You must obtain a
CableCARD from a local cable service provider.
For more information, visit the website : www.cablelabs.com
1. Insert the CableCARD into the “CableCARD™” slot and the message “CableCARD™
Inserted” is displayed.
2. Plug the incoming cable into the ANT 1 IN (CABLE) terminal on the back of the TV.
The CableCARD recognizes input signals from ANT 1 IN (CABLE).
3. Within a few minutes after step 2, a message will appear with a phone
number to call to activate the CableCARD. This message contains the
CableCARD ID and Host ID numbers of your TV, which records these
numbers in preparation for activation.
4. After activation, the cable provider will send activation messages to the
CableCARD. During this operation, the message “Updating Channel List”
is displayed. When the “Updating Channel List” process is completed, the
message “Updating Completed” is displayed and your TV will switch to an
active channel.
➣
Using the OCAP (OpenCable Application Platform) Data Service
ANT 1 IN
(CABLE)
In order to start service for
this device, please contact
customer sevice at
PH# 888 123-XXXX
CableCARD(tm): 0-123-456-789-XXX
Host ID:0-123-456-XXX
Scrambled Channel or
weak signal
Updating Channel List
BN68-01800A-01Eng.indb 69 2008-10-24 �� 10:44:15