Filter
Top Products
English - 70
Using the CableCARD
This menu works with a CableCARD provided by a local cable service provider.
Prior to accessing this menu, a CableCARD should be connected to the rear panel of the TV.
For detailed connection instructions, refer to the ‘Connecting a CableCARD’ section on page 69 of this manual.
Displaying CableCARD related information
To access information on Status, Pairing, Network Setup of the CableCARD provided by the service provider in CableCARD
menu.
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to
select “Setup”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “CableCARD™”, then press the
ENTER button.
Press the ▲ or ▼ button to select the desired option. Then press the
ENTER button.
Press the EXIT button to exit.
The options are dependent on your Cable company.
➣
Using the CableCARD Setup Function
Sets up relevant CableCARD options.
CableCARD Reset
Resets CableCARD when the channels provided by CableCARD are not available.
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to
select “Setup”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “CableCARD Setup”, then press the
ENTER button.
3. Press the ▲ or ▼ button to select “CableCARD Reset”, then press the
ENTER button.
Setup
Energy Saving : Off
PIP
CableCARD™ ►
CableCARD Setup
Software Upgrade
Setup
PIP
CableCARD™
CableCARDSetup ►
Software Upgrade
Setup
PIP
CableCARD™
CableCARDSetup ►
Software Upgrade
CableCARD Reset
Channel List Reloed
CableCARD Reset
Channel List Reload
BN68-01800A-01Eng.indb 70 2008-10-24 �� 10:44:16