Filter
Top Products
English-24English-24
OPERATION
Labeling Channels
1
Press the MENU button to display
the menu.
Press the
UP/DOWN buttons
to select “Channel”, then press
the ENTER button.
Press the
UP/DOWN buttons
to select “Name”, then press the
ENTER button.
2
Press the UP/DOWN buttons
to select a channel.
You can assign a name
to a channel.
Press the
LEFT/RIGHT buttons
to move to “Labeling” and use
the UP/DOWN buttons to
assign a name.
Repeat this procedure to enter up
to four characters.
Press the
EXIT button to exit.
Alternate method:
Use the number buttons to directly select the channel that will be added or
erased. Press the “ADD/DEL” button.
Repeatedly pressing ENTER will alternate between “Add” and “Delete”.
Press the EXIT button to exit.
You can view any channel (including an erased channel) by using the number
buttons on the remote control.
1
Use the number buttons to directly
select the channel to Add or Delete.
Press the
MENU button to
display the menu.
Press the
UP/DOWN buttons
to select “Channel”, then press
the ENTER button.
Press the
UP/DOWN buttons
to select “Add/Delete”.
Press the
ENTER button.
Press the ENTER to select
“Add” or “Delete” (Pressing
ENTER toggles between the
two).
Press the
EXIT button to exit.
Adding and Erasing Channels (Manual Method)
The characters available are :
Letters of the alphabet (A~Z)
Numbers (0~9)
Special characters
(
*
,
_
,
_
, space)
BN68-00656A-04Eng.qxd 9/18/04 10:45 AM Page 24