Filter
Top Products
English-65
Adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture noise.
If the noise is not removed by fine tuning alone, then do the frequency adjustments to
the utmost and fine tune again. After the noise has been reduced, re-adjust the picture
so that it is aligned on the center of screen.
Press the PC button on the remote control to select the PC mode.
PC DISPLAY
2
Press the ENTER
button to select
“Image Lock”.
1
Press the MENU button to
display the menu.
Press the
UP/DOWN
buttons to select “Setup”,
then press the ENTER
button.
Press the
UP/DOWN
buttons to select
“PC” then press the
ENTER button.
3
Press the UP/DOWN
buttons to select
“Coarse” or “Fine”,
then press the
ENTER button.
Press the
LEFT/RIGHT
buttons to adjust the
screen quality, vertical
stripes may appear or
the picture may be blurry.
Press the
EXIT button to
exit.
<Adjusting Coarse>
<Adjusting Fine>
BN68-00656A-04Eng.qxd 9/18/04 10:48 AM Page 65