Filter
Top Products
English - 35
Connecting Headphones (Sold separately)
You can connect a set of headphones to your set if you wish to watch a TV program without disturbing other people in the
room.
When you insert the headphone’s plug into the headphone jack, you can not
operate “Mode”, “Equalizer”, “SRS TruSurround XT” and “Select Speaker” in
Sound menu.
Prolonged use of headphones at a high volume may damage your hearing.
You will not hear sound from the speakers when you connect headphones to
the TV.
The headphone volume and TV volume are adjusted separately.
➣
➣
➣
➣
Selecting the Sound Mode
You can set the sound mode in the “Tools” menu. When you set to “Dual I II”, the current
sound mode is displayed on the screen.
1. Press the
TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “Dual I II”.
3.
Press the ◄ or ► button to select required option.
4.
Press the
ENTER button.
Audio Type Dual 1/2 Default
A2 Stereo
Mono MONO
Automatic change
Stereo STEREO ↔ MONO
Dual DUAL 1 ↔ DUAL 2 DUAL 1
NICAM
Stereo
Mono MONO
Automatic change
Stereo MONO ↔ STEREO
Dual
MONO ↔ DUAL 1
DUAL 2
DUAL 1
If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.
This function is only activated in stereo sound signal. It is deactivated in mono sound signal.
This function is only available in Analogue TV mode.
➣
➣
➣
TV Side Panel
15
Tools
Anynet+ (HDMI-CEC)
Picture Size : Auto Wide
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual l ll ◄ Mono ►
Move Adjust
e
Exit
BN68-01409L-00Eng.indb 35 2008-08-14 �� 8:39:48