Filter
Top Products
English _25
DVR SETUP
SYSTEM MANAGEMENT
You can check, update and initialize the system information.
Using the mouse may help easy setup.
Use the direction buttons to move to <SYSTEM
MANAGEMENT> in the left corner of the SYSTEM setup
menu and press the [ENTER] button.
Use direction buttons (
▲▼◄►
) to move to a desired item,
and press the [ENTER] button to set the value.
SYSTEM INFORMATION: Can check the current
system version and system-related settings.
Press the <INFO> to display the “SYSTEM
INFORMATION” window.
S/W VERSION: Displays the software version.
H/W VERSION: Displays the hardware version.
VIDEO SIGNAL TYPE: Displays the signal type of the
current video.
DISK CAPACITY: Displays the capacity of the HDD.
IP ADDRESS: Displays the IP address of the DVR.
MAC ADDRESS: Displays the DVR’s MAC address.
DDNS SERVER: Displays the domain name of the appropriate set.
RTSP SERVICE PORT: Indicates the number of a port used when the remote management software
program accesses the DVR.
WEB SERVER PORT: Indicates the number of a port used to connect to the DVR using the web
browser.
SYSTEM NAME: Set the system name using virtual keyboard. You can type in up to 15 bytes.
FIRMWARE UPDATE: You can upgrade the current software version.
For more information about the firmware update, refer to “To update the firmware”. (Page 26)
FACTORY DEFAULT: Restore the DVR settings to the factory default.
SYSTEM DATA: Save the system setup data or import the system information of other device.
SAVE : Stores the setting information of the DVR into the storage device.
Connect the storage device to the USB port of the system.
LOAD : Applies the setting information in the storage device to the DVR.
Connect the device to store the system data to the USB port.
PASSWORD: Turns on or off the popup of the “LOG IN” dialog if you access a menu item such as
Power Off, System Setup, Record Setup, Backup, Search.
AUTO LOGOUT: Select to set the auto logout when no input is made after you logged in.
DURATION: Specify the period for the auto logout.
When your settings are completed, press the <APPLY> button on the bottom.
Your settings will be applied.
Press the <CLOSE> button to display the confirmation dialog and return to the previous menu.
1.
2.
•
-
-
-
-
-
-
-
-
-
•
•
•
•
-
-
•
•
•
3.
4.
SYSTEM ID
SYSTEM INFORMATION
SYSTEM NAME
FIRMWARE UPDATE
CANCEL APPLY
CLOSE
SYSTEM
DATE / TIME
SYSTEM
MANAGEMENT
REMOTE
CONTROLLER
ON
FACTORY DEFAULT
SYSTEM DATA
PASSWORD
LOAD
NETWORK
SAVE
USB
LOAD
INFO
ON
AUTO LOGOUT
1 MIN
DURATION
SYSTEM ID
SYSTEM INFORMATION
SYSTEM NAME
FIRMWARE UPDATE
CANCEL APPLY
CLOSE
SYSTEM
DATE / TIME
SYSTEM
MANAGEMENT
REMOTE
CONTROLLER
ON
FACTORY DEFAULT
SYSTEM DATA
PASSWORD
LOAD
NETWORK
SAVE
USB
LOAD
INFO
ON
AUTO LOGOUT
1 MIN
DURATION
SYSTEM INFORMATION
SRD-450_V0.10_XXXXXX
S/W VERSION
MAMD500
H/W VERSION
NTSC
VIDEO SIGNAL TYPE
244 GB
DISK CAPACITY
192.168.1.200
IP ADDRESS
00115ff00378
MAC ADDRESS
websamsung.net
DDNS SERVER
554
RTSP SERVICE PORT
8080
WEB SERVER PORT