Filter
Top Products
62_ web viewer
web viewer
Color setting
You can adjust all settings from 0 to 100 for each channel in fine tune mode, and the default is 50.
From the left menu tree, select <Camera>.
Click <Color>.
Make your changes as necessary in details.
For more information, refer to “COLOR”. (Page 28)
Click <Ok>.
Your changes will be saved.
Motion setting
You can specify the motion detection area, and specify the use of the alarm output if a motion is detected.
If a detection area is specified, the system will detect a motion in that area if it occurs.
From the left menu tree, select <Camera>.
Click <Motion>.
Click a motion area and drag it up to a desired point. The
selected cells will turn in a different color, which will be
specified as a detection area.
For more information, refer to “MOTION SENSOR”. (Page 29)
Click <Ok>.
Your changes will be saved.
OSD setting
You can change the display information.
From the left menu tree, select <Display>.
Click <OSD>.
Make your changes as necessary in details.
For more information, refer to “OSD”. (Page 30)
Click <Ok>.
Your changes will be saved.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
4.