Filter
Top Products
22
English
Connections
Connecting to a Wireless Network
To connect your TV to your network wireless, you need a wireless router or modem and a Samsung Wireless LAN adapter
(WIS09ABGN, WIS09ABGN2, WIS10ABGN-sold separately), which you connect to your TV’s back or side panel USB port.
See the illustration below.
Samsung’s Wireless LAN adapter is sold separately and is offered by selected retailers, Ecommerce sites and Samsungparts.
com. Samsung’s Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication protocols. Samsung
recommends using IEEE 802.11n. When you play video over a IEEE 802.11b/g connection, the video may not play smoothly.
✎
NOTE
x
You must use the “Samsung Wireless LAN adapter" (WIS09ABGN, WIS09ABGN2, WIS10ABGN) to use a wireless
network.
x
Samsung Wireless LAN adapter and The USB extension Cable are sold separately and are offered by select retailers,
Ecommerce sites and Samsungparts.com.
x
To use a wireless network, your TV must be connected to a wireless IP sharer (either a router or a modem). If the
wireless IP sharer supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network.
x
Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer
is currently being used by another device nearby, this will result in interference and communication failure.
x
If you apply a security system other than the systems listed below, it will not work with the TV.
✎
If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or
TKIP AES (WPS2Mixed) for your wireless router, Samsung TVs will not support a connection in compliance with
new Wi-Fi certification specifications.
x
If your wireless router supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button
Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in
either mode.
x
If your router, modem, or device is not certified, it may not connect to the TV via the “Samsung Wireless LAN
adapter.”
x
Connection Methods: You can setup the wireless network connection on five ways.
– Auto Setup (Using the Auto Network Search function)
– Manual Setup
– WPS (PBC)
– One Foot Connection
– Plug & Access
x
The TV may not recognize the Samsung Wireless LAN adapter if you connect it to the TV with a USB hub or USB
extension cable other than the cable supplied with the TV.
The LAN Port on the Wall
LAN Cable
Wireless IP Sharer
(AP having DHCP Server)
TV Rear
Samsung Wireless LAN Adapter