Sansui HDLCDVD220 Flat Panel Television User Manual


 
Antenna connections
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your
antenna system. If you are using a Cable TV service, see page 14 for Cable TV connections.
Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire)
Antenna
Jack
(_ _ 75 ohm Coaxial
Cable
Antenkna_
300-75 ohm Matching
Transformer
Connect the 75 ohm cable from the combination
VHF/UHF antenna to the antenna jack.
If your combination VHF/UHF antenna has a 300
ohm twin-lead wire, the use of the 300-75 ohm
matching transformer may be necessary.
Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm twin-lead wires)
300-75 ohm Matching Transformer
Antenkna VHF 300 ohm
UHF 300 ohm
Combiner
Connect the UHF 300 ohm twin-lead wire to
the Combiner (not supplied). Connect the VHF
300 ohm twin-lead wire to the 300-75 ohm
Matching Transformer. Attach the Transformer to
the Combiner, then attach the Combiner to the
Antenna Jack.
Separate VHF/UHF Antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)
Antenna VHF 75 ohm
Combiner
Connect the VHF 75 ohm cable and UHF 300 ohm
twin-lead wire tothe Combiner (not supplied). Attach
the Combiner to the Antenna Jack.
IMPORTANT: Go to page 15 to choose the signal and search for channels.
13