Connections to other equipment
The exact arrangement you use to interconnect various video and audio components to this unit is dependent
on the model and features of each component. Check the Owner's Manual provided with each component for
the location of video and audio inputs and outputs.
To connect the LCD TV/DVD to a VCR
Rear of the unit
To VIDEO/AUDIO IN
@ @ @_._ _ TO Audio/Video OUT /
[] @ @ Audio/Video cord (not supplied)
VCR
To connect the LCD TV/DVD to a VCR with an S-Video cord
If you connect aVCR with a S-Video cable to the S-VIDEO IN jack on the rear side of the unit, you must also
connect the audio cables to the AUDIO IN jacks on the rear side of the unit.
The S-Video cable only carries the video signal.The audio signal is separate.
NOTE:
• When the S-Video cable and the standard video cable are connected at the same time, the S-Video cable
takes precedence.
Rear of the unit
To S-VIDEO IN To S-Video OUT VCR
_ _ I _ S-Video cord ]
@ @ ,_'_ _ (not supplied)
[] @ @ @_._ _ Audio cord (not supplied)
To AUDIO IN To Audio OUT
To connect to a DVD player with Component Video Input
You can enjoy a high quality picture by connecting the unit's COMPONENT VIDEO OUT jacks of your DVD
player with the COMPONENT video cables (not supplied).
Rear of the unit
___ @,_ @1 To COMPONENT AUDIO IN To Audio OUT
@ © Z i <>m. __ __f<:> ovo
@_=-_ cO-,,,/ Audio cord (not supplied) _ r,/"
_ Componentvideocord _1_ i i
(not supplied)
To COMPONENT IN To Component OUT
NOTE:
• Component Video input of the unit are for use with a device which output 480i/1080i interlaced signals and
480p/720p progressive signals.