Filter
Top Products
3
4
Press • or • to select "Ch Label", then press •
or ENTER.
The "Ch Label" menu will appear.
Press 41or • to select a channel you want to
label, then press •.
5 Press 41or • repeatedly until the character you
want appears inthe first space.
The characters rotation as follows:
r 0" °" 9 <-> A i ";ZPI_EE _ ' '() @/+=- q
If the character which you desire appears, press
ENTER.
Repeat this step to enter the rest of the
characters.
If you would like a blank space in the label name,
you must choose the empty space from the list of
characters.
O When you finish inputting the label name, press
EXIT/CANCEL to return to the normal screen.
7 Repeat steps 4-5 for other channel.You can
assign a label to each channel.
To clear a Ch Label
After step 4 above, press • or • to select "Label
Clear", then press • or ENTER.
NOTE:
• The channel labels will be reset after "Automatic
Search" on page 15.
Labeling video inputs
The Video Label feature allows you to label each
input source for your TV.
1 Press SETUP/TV MENU in the TV mode.The TV
2
3
4
5
menu screen will appear.
Press • or • to select "Setup", then press • or
ENTER.
Press • or • to select "Video Label", then press
• or ENTER.
Press • or • to select an input which you want to
label.
Press 4 or • to select the desired label for that
input source.
6
- :Uses the default label name
VCR :Video cassette recorder
DVD :DVD video
DTV :Digital TV set-top box
SAT :Satellite box
CBL :Cable box
HD :HDMI device (only for HDMI inputs)
Press EXIT/CANCEL to return to the normal
screen.
Setting the V-Chip
An age limitation can be set to restrict children
from viewing or hearing violent scenes or
pictures that you may choose to exclude. The
restriction applies to "TV Rating" and "Movie
Rating" if this data is transmitted. You may set
this restriction separately. To use the V-Chip
function, you must register a password.
To register a password
1 Press SETUP/TV MENU in the TV mode.The TV
menu screen will appear.
2 Press • or • to select"Lock", then press • or
ENTER.
3 Select and enter your password (4 digits) using
Number buttons (0-9), then press ENTER.
4
"€" appears instead of the number.
Enter the same password again to confirm, then
press ENTER.
The password is now registered.
NOTE:
• If you forget the password, contact Customer
Service at 1-800-289-0980 for assistance.
Your original remote control will be required.
• To avoid forgetting the password, write it down and
keep in a safe place.
To set the V-Chip
1 Press SETUP/TV MENU in the TV mode.The TV
menu screen will appear.
2 Press • or • to select"Lock" menu, then press
• or ENTER.
3 Use Number buttons (0-9) to enter your
password, then press ENTER. Then Lock menu
will appear.