Filter
Top Products
English
17 How to use
Recording video to the hard disk
The internal hard disk is automatically formatted with
recording area, normal recording, recording conditions,
etc. Before starting recording, verify the recordable
duration for normal recording (List of recording rate and
recording times: P83). The formatting can be modified
using "Recording settings". (P39)
A The total capacity of the hard disk and each area
can be verified. (P43)
B The settings for recording image quality
(ENHANCED), audio recording, recording rate,
and programmed recording can be verified. (P49)
C Overwrite setting for each recording area can be
verified. If overwrite is set, and the recording
area is full, the oldest video is overwritten by
new in the order of recording. The default setting
is ON, which enables overwrite, thus provides for
continuous recording. (P46)
b Regarding network downloads
When downloading image data of the DVR via the network,
an archive capacity area of approximately 2GB is necessary
for best quality images. (40,000 images without audio)
Video from all cameras connected to the video input terminals
of the DVR can be recorded with one touch of a button.
1
Press the REC/STOP button while a live image is
displayed.
"REC" appears on the operation display, and recording
starts.
2
Press the REC/STOP button for approximately 3
seconds to stop recording.
The "REC" display disappears.
• Press the PLAY/STOP button to start
playback. (P18)
• Playback is possible during recording. (P18)
b Other recordings
In addition to normal recording, the following types of
recordings can be used. These methods require some
settings and installation. Refer to the appropriate pages.
☞ Timer-controlled recording (records to the normal
recording area) P51
Automatically records the video within the preset
timeframe.
☞ Alarm recording (records to the alarm recording area)
P55
Automatically records when an alarm is input from the
external alarm switch or the motion sensor.
☞ Pre-alarm recording (records to the alarm recording
area) P57
Records video and audio directly before the alarm input.
This information can be used for analyzing the
circumstances of the alarm occurrence.
Recording format verification
<RECORDING AREA SET>
TOTAL CAPACITY : 82GB
NORMAL RECORDING AREA : 80 %
AREA FULL RESET ->
ALARM RECORDING AREA : 19 %
AREA FULL RESET ->
ARCHIVE AREA : 1 %
AREA FULL RESET ->
CAUTION : WHEN THE AREA SETTING IS CHANGED,
THE WHOLE AREA WILL BE INITIALIZED !
1%
1%
80%
80%
1%
80%
19%
19%
19%
Alarm
recording
area
Archive area
Normal recording area
<NORMAL REC MODE SET>
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : OFF
REC RATE : 12.5FPS ( 35H)
REC PROGRAM GROUP : OFF
<RECORDING CONDITIONS SET>
NORMAL RECORDING AREA
OVERWRITE : ON
ALARM RECORDING AREA
OVERWRITE : ON
REMAINING DISK WARNING : **
SERIES RECORDING : OFF
AUTO DELETE : OFF
Normal recording
(normal recording area)
02
REC/STOP
26-10-06 09:30:00 REC REPEAT EN A ARCHIV 0001
L8HBM_XE(HARD)(GB).book 17 ページ ２００６年２月６日 月曜日 午前１０時５２分