Sanyo dsr-3706pa DVR User Manual

Open as PDF

of 88

English

Initial settings

How to set 38

Set automatic scrolling, masking or motion sensor

for the time periods (A/B).

The default setting for "SELECT TIME PERIOD" is A for

all items. When the specified time comes, these

operations will work in time period A, but more detailed

settings are necessary.

☞ Set the camera video for automatic scrolling

(P73)

The main monitor and monitor 2 can have different

settings for each of the four time intervals (T-1~T-4).

☞ Masking specific camera images (P75)

Unnecessary camera images can be set to invisible

for each of the four time intervals (T-1~T-4).

☞ Set motion sensors for camera videos (P58)

Motion sensors can be set for camera videos for

each of the four time intervals (T-1~T-4), and use

those as alarms for intruders.

b Changing the time period of operations

Turn the S-dial clockwise.

The "TIME PERIOD A" of SEQUENCE starts blinking.

2 Select "TIME PERIOD B" by turning the J-dial, and

then turn the S-dial clockwise.

Repeat the same procedure to select the time period for

MASK and MOTION SENSOR.

Example:

Press the EXIT/OSD button when the settings are

complete.

The operation returns to the normal screen.

b Setting the times for the time periods

• If T-1 ~ T-4 are all set to "00:00", then only T-1 will be valid.

T-1 will start at 12:00am (midnight) and end at 12:00am

(midnight) of the next day.

• It is not possible to set T-3 and T-4 to a period that would

extend into the next day.

In this case, set T-4 to "23:59".

• If T-4 is set to "00:00", T-4 becomes invalid and operations

skip from T-3 to T-1. The set operation will last from T-3 to

T- 1 .

E Time period setting (continued)

SELECT TIME PERIOD

SEQUENCE TIME PERIOD A

MASK TIME PERIOD A

MOTION SENSOR TIME PERIOD A