Filter
Top Products
37
Attaching the IR Blaster Cable Connector to Your Set-Top
Setting Up the Setting Up the
Setting Up the Setting Up the
Setting Up the
VV
VV
V
CR Commander SerCR Commander Ser
CR Commander SerCR Commander Ser
CR Commander Ser
vicevice
vicevice
vice
WARNING:
Electric shock hazard! Unplug all
electronic devices before connecting
or disconnecting any device cables.
Your cable service provider may offer a
VCR Commander™ Service. This service
gives you a quick and easy way to record
the program you are currently watching or
any program in the future.
Your set-top includes a device called an IR
Blaster, which enables your set-top to
control your VCR.
To use the VCR Commander service:
• Your cable service provider must offer
the service.
• You must attach the IR Blaster
(included) to your set-top, and set up
your set-top to recognize your VCR.
To attach the IR Blaster cable to your set-
top, follow these steps:
1. Make sure that the set-top is not
connected to the AC power outlet.
2. Locate the port labeled IR on the back
of the set-top.
3. Plug the cable connector into the IR
port.
4. Reconnect the set-top to the AC power
outlet.
S-VIDEO
OUT
CABLE
OUT
IR
DVI13941394
AUDIO OUT
R
L
Pr
Pb
Y
VIDEO
OUT
DIGITAL
AUDIO
OUT
HDTV
0003B4287797
SABDQXTL N0006246618
T10834
IR
Blaster
Cable
Connector
AUDIO
OUT
OPTICAL