Sennheiser 2020 Universal Remote User Manual


 
14
Indications and displays on the
transmitter
Operation and battery status indication
The red LED LOW BATT/MUTE provides information
on the current operating state of the transmitter:
Red LED off:
The transmitter is switched on and the capacity of the
batteries/BA 2015 accupack is sufficient.
Red LED flashing:
The batteries are/the BA 2015 accupack is going flat
(LOW BATT). In addition, the 4-step battery status
display on the LC display provides information on
the remaining battery/BA 2015 accupack capacity.
AF peak indication
The yellow LED PEAK º lights up when the trans-
mitter’s audio input is overmodulated.
If the transmitter’s audio input level is excessively
high, the sound of the receivers may be distorted. In
order to avoid distortion in the receivers, reduce the
sensitivity of the transmitter’s line and/or micro-
phone input (see “Changing the sensitivity of the line
input” on page 34 and “Changing the sensitivity of
the line input” on page 34).
º
LINE
CH 03
MIC