Filter
Top Products
31
̈ Press the SET button µ to permanently store the
selected channel.
“STORED” briefly appears on the display. The
transmitter now transmits on the selected channel.
The last menu selected is shown on the display.
To exit the operating menu:
̈ Select the “EXIT“ menu by pressing the ̆/̄ rocker
button ¾ and press the SET button µ.
The standard display is shown.
Or:
̈ Repeatedly press the ON/OFF button ² until the
standard display is shown.
Setting the receiver channel
In order for the receiver to receive the transmitter
signal, both transmitter and receiver have to be set to
the same channel.
To manually set the receiver channel:
̈ Press the ̆/̄ rocker button for channel
selection ´.
The selected channel is shown on the channel
display ቢ.
If the transmitter is transmitting on this channel,
the receiver’s RF signal indication ብ indicates the
field strength of the received RF signal.
Notes:
y By pressing and holding the ̆/̄ rocker button for
channel selection ´, the display cycles
continuously (repeat function).
y After channel 6, the display will return to channel 1.
6
ብ