Filter
Top Products
39
The operating menu of the
transmitter
Working with the transmitter’s operating menu
To get into the operating menu:
̈ Make sure that the lock mode is deactivated (see
“Activating/deactivating the lock mode” on
page 37).
̈ Press the SET button µ.
The operating menu appears and the first menu
“CHAN” flashes on the display.
To select a menu:
̈ Repeatedly press the ̆/̄ rocker button ¾ until
the desired menu flashes on the display.
̈ Press the SET button µ.
To change a menu:
̈ Press the ̆/̄ rocker button ¾.
To store a setting:
̈ Press the SET button µ.
To exit the operating menu:
Note:
If you do not press a button for more than 30
seconds, the transmitter automatically returns to
the standard display.
̈ Select the “EXIT“ menu by pressing the ̆/̄ rocker
button ¾ and press the SET button µ.
The standard display is shown.
Or:
̈ Repeatedly press the ON/OFF button ² until the
standard display is shown.