Filter
Top Products
23
Inserting and replacing the transmitter batteries /
accupack
For powering the transmitter, you can either use the
rechargeable BA 2015 accupack ´ or two 1.5 V AA
size batteries. NB: Do not use any other rechargeable
batteries!
̈ Open the battery compartment by pressing the two
release buttons ƹ and open the cover ¿.
̈ Insert the batteries or the BA 2015 accupack ´ as
shown in the diagram on the left. Please observe
correct polarity when inserting the batteries/accu-
pack.
̈ Close the battery compartment cover ¿.
Connecting the microphone
Note:
Suitable Sennheiser microphones are listed on
page 9.
̈ Connect the microphone to the transmitter’s
microphone input ».
̈ Lock the microphone plug by screwing down the
coupling ring.
̈ Adjust the sensitivity of the microphone input as
described on page 35.
ƹ
ƹ