Filter
Top Products
34
̈ Press the SET button µ to permanently store the
setting.
“STORED” briefly appears on the display.
̈ Adjust the sensitivity of the line input to match the
connected audio source as described in the
following section.
Changing the sensitivity of the line input
To adjust the sensitivity of the line input to match the
connected audio source:
̈ Make sure that the line input is switched on (see
previous section).
̈ Connect the external audio source, switch it on and
start playback.
̈ Press the SET button µ.
The operating menu appears and the first menu
“CHAN” flashes on the display.
̈ Repeatedly press the ̆/̄ rocker button ¾ until
“SENSIT“ flashes on the display and the LINE level
display ቦ appears.
̈ Press the SET button µ.
The current input sensitivity and the LINE level
display ቦ appear on the display.
̈ Press the ̆/̄ rocker button ¾ to change the
input sensitivity so that the LINE level display ቦ
shows full deflection during the loudest passages,
but the yellow LED PEAK º never lights up.
̈ Press the SET button µ to permanently store the
setting.
“STORED” briefly appears on the display, indicating
that the sensitivity of the line input has been
stored.
LINE
CH 03
MIC
ቦ