Sharp XG-NV7XU CRT Television User Manual


 
E-51
Appendix
Transporting the Projector
Using the Carrying Bag
A soft-side carrying bag is provided to transport the
projector. Before placing the projector into the carrying
bag, set up the inner pad inside the bag as shown.
CAUTION
Rotate the focus and zoom rigns to store the lens before
placing the projector into the carrying bag.
The supplied carrying bag is made exclusively for the
projector and its supplied accessories. Do not place other
items into the carrying bag with the projector or use the
bag to transport items other than the projector and its
accessories.
This bag is provided merely to transport the projector and
its accessories, not to protect these products from damage
as a result of rough handling. Do not expose these products
to shocks or impact when transported in the carrying bag.
Wait until the projector has sufficiently cooled before placing
it into the carrying bag. If the projector is placed into the
bag while it is still hot, the heat may damage the bag lining.
Carrying bag
Inner pad
Projector
Attaching the shoulder strap to the carrying bag
1
Take the shoulder strap
out.
The shoulder strap is stored in the
pocket located in front of the
carrying bag.
Using the Lens Cap Strap
A lens cap strap is provided to prevent the loss of the lens cap.
1
Attach the lens cap strap to the lens
cap.
2
Attach the lens cap strap to the
projector.
You can also use the end of a mechanical pencil or other pointed object to feed the lens cap strap through the openings.
2
Fasten the shoulder strap
to the carrying bag.
Follow the same procedure for the
other end of the strap.