Sharp LC-40LE730E Flat Panel Television User Manual


 
HDMI (DVI) Connection
ø 3,5 mm stereo mini
jack cable
HDMI 1, 2, 3 or 4
HDMI-certified cable
DVI/HDMI Cable
PC connection
Connecting a PC
Analogue Connection
ø 3,5 mm stereo
mini jack cable
VGA cable
You can select the picture size.
1 Press MENU on the remote control,then press
OK.
2 Press key to select “Advanced Video”, then
press OK.
3 Press key to select “Aspect ratio”, then press
OK.
4 Press key to select the desired item, then press
OK.
Item
Auto
Picture size is adjusted automatically
Full
An image fully fi lls the screen
Dot by Dot
Displays an image with the same
number of pixels on the screen
NOTE
You can also select an item by pressing f on the remote
control unit.
Connect the PC before making adjustments.
Selectable picture size may vary with input signal type.
The “Aspect ratio” adjustment is only available for analogue
signals through the “PC IN” terminal.
NOTE
• When using the PC-IN terminal is necessary to connect a
audio cable.
Normal Full
Example
DVI/VGA Conversion cable
ø 3,5 mm stereo
mini jack cable
After connection
If after connecting a PC to the TV through a HDMI
cable, the audio does not run, connect a mini stereo
connector of ø 3.5mm between TV and PC as
indicated in the previous drawing.
When a PC is connected to the TV with a DVI
cable, it will be necessary to connect a mini stereo
connector of ø 3.5mm of the TV to PC as indicated
in the previous drawing.
Selecting the picture size
16
PC
USB
(WIFI)
PC IN
HDMI / PC
ANALOG
AUDIO
INPUT
HDMI 1
(ARC)
HDMI 2
HDMI 3
DIGITAL
AUDIO
OUTPUT
PC
USB
(WIFI)
PC IN
HDMI / PC
ANALOG
AUDIO
INPUT
HDMI 1
(ARC)
HDMI 2
HDMI 3
DIGITAL
AUDIO
OUTPUT
HDMI 1
(ARC)
HDMI 2
HDMI 3
HDMI 4
PC
HDMI
HDMI / PC
ANALOG
AUDIO
INPUT
PC