Filter
Top Products
HDMI devices
Connecting a player/recorder only
Player/Recorder
HDMI-certified cable (commercially available)
HDMI CEC (Consumer Electronics
Control) menu
Go to “Menu” > “Settings” > "Input Settings" > “HDMI
CEC” and select the menu you want to set.
Set to “On” to enable HDMI CEC functions.
If this is activated, the one touch play function is enabled.
While the TV is in standby mode, it automatically turns
on and plays back the image from the HDMI source.
NOTE
• The factory default for this item is “Off”.
If this function is set to "On", is possible to power off all
HDMI devices connected in a daisy chain.
If this function is set to “On”, the TV can send audio data
for video content shown on the TV to a connected audio
device to HDMI 1 with just one ARC-compatible cable
(HDMI 1.4 or upper). Using this function eliminates the
need to use a separate digital or analogue audio cable.
NOTE
• ARC is only available in HDMI 1 terminal.
Basic operation
HDMI CEC control
Auto TV Power On
Speaker Output (Audio Return Channel)
Device List
HDMI CEC allows you to operate the HDMI-connected
device with a single remote control unit.
1 Press I to start playback of a title.
2 Press J to fast forward.
• Press G to reverse.
• Press REC E to start recording.
• Press REC STOP H to stop recording.
• Press H to stop.
• Press F to pause.
• Press SOURCE a to turn the HDMI-
connected device on/off.
Operating a HDMI CEC device
Device Scan
Search all HDMI devices connected to the TV.
If multiple HDMI devices are connected in a daisy chain,
you can specify which device to control here.
Press a/b to select “Model select”, and then
press OK. The HDMI device changes every time
you press OK.
You can choose to listen to the TV sound only from the
speaker system.
1. Set to On and press 6.
The sound from the TV speaker is silenced and only
the sound from the speaker system is audible.
2. Set to Off and press 6.
Speaker system is silenced and TV speaker is
audible.
You need to use ARC-compatible cables/devices and
connect to the HDMI 1 terminal to activate this function.
NOTE
• When you use "Speaker Output" make sure to use a HDMI
cable 1.4 or upper.
Auto Link Power Off
Connection for using “Speaker Output”
30
HDMI 4
HDMI 1
(ARC)
HDMI 2
HDMI 3
USB REC