Filter
Top Products
Channel settings
Channel
Channel adjustments
Allows to reconfigure the channels after initial auto
installation has been completed.
●
● Auto tuning
This function allows you to select the country and
automatically adjusts the channels for digital, cable,
satellite (Only LE732 model series) or analogue
individually.
●
● DTV manual tuning
Allows you to tune digital channels manually.
●
CADTV manual tuning
Allows you to add new cable services manually.
This setting appears after searching for cable broadcasts.
●
SADTV manual tuning
(Only LE732 model series
)
Allows you to add new satellite services manually.
This setting appears after searching for satellite broadcasts.
See next page.
●
ATV manual tuning
Allows you to tune in analogue channels manually.
●
Programme edit
Allows you move channels, delete channels, skip
channels and to set up a favourite channels list.
Select the channel you want to reorganize and press
◄/►to change between Viewable, Skipped (to
ignore it) and Favorite (to add it to favorite list). Press
the RED button to delete it, the YELLOW button to
move it or GREEN button to rename it.
NOTE
• If you press FAV when you are not in any adjustment menu,
the favourite channel list will appear.
●
Satellite edit
(Only LE732 model series)
Allows you to adjust the satellite propierties.
●
● Signal information
Shows the signal power and quality.
●
● CI information
Allows to see the CA card information (Conditional
Access Module): name, supplier and OSD.
●
● Auto channel number
Automatic channel sorting.
●
● Additional search
Use this menu to add new services automatically.
Install channels
Searching
for cable broadcasts
●
● CADTV Auto Tuning
Allows you to add cable services.
1 With ▲/▼/◄/► keys select Channel, then select
Auto Tuning and press OK.
2 With ▲/▼/◄/► keys select Country and Tuner
type (CADTV).
3 Go to Start Search and press OK.
●
● CADTV Manual Tuning
After the CADTV Auto tuning, you may add new
cable services manually.
1 With ▲/▼/◄/► keys select Channel and CADTV
Manual tuning and press OK.
2 Select manually Frequency and Symbol rate by
using numerical keys (Remote Control).
3 With ▲/▼ keys select Modulation and press OK.
4 Select the Modulation from the list, confirm by
pressing OK and press 6 to return.
5 With ▲/▼ keys select Start Search and press OK.
NOTE
• The value of "Frequency", "Symbol rate" and
"Modulation" should be set to the value specified by the
cable provider.
Basic adjustment
22