Sharp LC-40LE730E Flat Panel Television User Manual


 
Recordings and timings
1. The timings will be stored in the USB REC
Programmed recording list in the USB REC
menu, pending to be executed.
2. All the fi nished recordings are available on the “USB
REC Recorded list” in the
USB REC menu.
Select the fi le you want to view and press OK
Press OK to playback the programme being
recorded. The TV set continues recording the
broadcast while you are watching the recorded
programme. The TV set shows
I
symbol on the
screen.
Press OK during playback to pause. The TV
shows the symbol
F
on the screen.
Press
V
playback to fast forward. By pressing
V
key repeatedly, allows you to select the fast
forward. By pressing
L
key the recording fast
forwards in intervals of fi ve minutes. Press OK to
restore the normal speed.
Press
S
during playback to rewind. By pressing
S
key repeatedly, allows you to select the
rewind speed. By pressing
T key the recording
rewinds in intervals of five minutes. Press OK to
restore the normal speed.
Recordings and timings
3. The TV set can start a timer recording while is in
standby mode. When the recording starts in this
mode, the status indicator (AQUOS pyramid) will
change from red to violet.
NOTES:
If you try to switch off the TV (TVa on RC) during a USB
recording, an on screen menu will appear. Then you can
decide to switch off completely or continue with the recording
until the end of the USB REC Manual programming. In
case it is an Immediate recording (you pressed USB REC
button), you can decide to switch off completely or continue
with the recording during the time you decide, or stop the
recording. In both cases, if you choose to continue with the
recording, the TV will switch off, but continue showing the
pyramid icon lighting in purple.
If you switch off the TV through the a on the panel control
key, the USB recording will be stopped directly and the TV
will be switched off.
4. The timer recordings are not possible when the TV
set is off, this is when the status indicator (AQUOS
pyramid) is not lit.
Deleting recordings
To delete non desired recordings stored in USB device,
follow the instructions below:
1.
Go to Multimedia > USB REC and select "USB
REC Recorded list".
2. Select the recording you want delete.
3. Press BLUE button on the remote control.
The deletion process is irreversible and causes
permanent loss of the recording.
NOTES:
The USB REC recording function does not work for Radio,
ATV channels or external inputs.
It can appear displaying troubles during rewind or fast forward
modes, depending on the USB memory characteristics.
The recorded data will be never available for any external
device (computer) or in other TV even if it is the same model.
The recordings only can be displayed in the same TV in
which they were made.
Programmes which require a PIN to watch them cannot be
recorded until you enter the PIN
.
USB REC function
35