Filter
Top Products
ENGLISH
19
E
Turning Power On/Off
Before turning on power, make sure that peripherals, external speakers, and the power cord are
connected properly.
Caution
• If the monitor is connected to a PC or a playback device, turn on the monitor rst before turning on the PC or
playback device.
Turning on the main power switch
When the main power switch is off, the monitor cannot be turned on using the POWER button on the
remote control unit.
Main power switch
Set the main power switch to
the “on” position.
▼ Rear view
Turning power on/off with the remote control unit
INPUT
I
N
P
U
T
Power LED
Press the POWER button to turn the power ON/OFF.
Power “On”: Power LED lights up green.
Power “Off”: Power LED lights up orange. (Standby mode)
▼ Remote control unit
▼ Front view
Caution
• When switching the main power switch or the POWER button off and back on, always wait for at least 5 seconds.
Rapid switching may result in a malfunction.
TIPS
• When the input mode (see page 20) is set to “DIGITAL” or “ANALOG” and there is no video signal input, the
backlight of the monitor is turned off and the monitor enters input signal waiting mode. (The power LED ashes
green.) If the monitor is in this mode and you press the POWER button on the remote control unit, the monitor
enters standby mode.
• If the remote control unit is not available, you can turn on/off the monitor by pressing the (power) switch beside
the power LED with a pointed object.(See page 8)