Filter
Top Products
54
E
Unit: inch [mm]
Dimensional Drawings
Note that the values shown are approximate values.
Opening height(21-7/8[
557])
Opening width(39[991])
15-3/4[400]
7-7/8[200]
4-5/8[119]
3-3/4[96]
1/4[7]
42-7/8[1089]
30-3/4[780]
24-1/8[614]
25-3/8[645]
VESA holes
(M6, 15mm in depth x 6 holes)
When mounting the monitor, be sure to use a wall-mount / ceiling-mount bracket they comply with the
VESA-compatible mounting method. SHARP recommends using M6 screws and tighten the screws.
Note that screw hole depth of the monitor is 15mm. Loose holding may cause the product to fall, resulting
in serious personal injuries as well as damage to the product. The screw and hole should come together
with over 5mm length of thread. SHARP recommends using mounting interface that comply with UL1678
standard.
When installing with 4 screws, use the following holes.