Filter
Top Products
23
IM-DR580H
03/10/15 IM-DR580H(E)2.fmIM-DR580H(E) TINSE0568AWZZ
Recording
-Recording from a Stereo System, etc.-
" Recording level adjustment
! Do not increase the recording level excessively. The
sound may be distorted.
! Once you adjust the digital recording level, the setting is
retained even after the recording stops. (For cancellation
instructions, see page 70.)
! The sound from the earphones does not change even if
the digital recording level is adjusted.
To interrupt recording
Press the button.
! To resume recording, press the button again.
! The track number will be increased by one each time the
recording is interrupted.
To stop recording
To turn off the power
Press the button whilst in the stop mode.
! The power automatically turns off approx. 2 minutes after
recording.
! The power does not turn off whilst recording is paused.
7
Press the PAUSE button on the stereo system to
enter the playback pause mode.
Here you can search for the track to record.
8
Press the button.
! The record indicator lights up.
9
Begin playback on the external equipment, the
output will be recorded.
Adjust the recording level so
that the maximum sound vol-
ume from the source makes the
reading swing somewhere be-
tween -4 dB and 0 dB.
Analogue recording (connecting with analogue cable)
The recording level can be ad-
justed between LINE 00 and
30.
Digital recording (connecting with digital cable)
You can adjust the level in 1 dB
increments between +10 dB
and -10 dB.
-4 dB 0 dB
00 - 30
+10 dB to
-
10 dB
Press the button.
! When you record or edit, "TOC" appears. This indicates
the TOC information is changed, but not recorded yet.
When recording is stopped, TOC is written on the MD.
Flashing (recording information)
Rotating
3