Filter
Top Products
82
IM-DR580H
03/10/15 IM-DR580H(E)9.fmIM-DR580H(E) TINSE0568AWZZ
References
-Troubleshooting-
Troubleshooting
Many potential "problems" can be resolved by the owner without calling a service technician. If something seems to be wrong
with this product, check the following before calling your authorised SHARP dealer or service centre.
The unit does not turn on.
" Is the AC adaptor disconnected?
" Is the battery exhausted?
" Is the unit in the hold mode?
" Has condensation formed inside the unit?
" Is the unit being influenced by mechanical shock or by
static electricity?
No sound is heard from the earphones.
" Is the volume set too low?
" Are the earphones plugged in?
" Are you trying to play a MiniDisc with data on it instead
of a MiniDisc containing music?
When the operation buttons are pressed, the unit does
not respond.
" Is the unit in the hold mode?
" Is the battery exhausted?
" Is the remote control unit plug or the earphones plug in-
serted firmly?
Some sounds are skipped.
" Is the battery exhausted?
" Is the unit being subjected to excessive vibration?
The MiniDisc cannot be ejected. (The compartment
does not open.)
" Has the track number or character information been
written on the disc yet?
" Is the unit in the recording or editing mode?
" Is the AC adaptor unplugged or did a power failure oc-
cur whilst recording or editing?
Recording and editing are impossible.
" Is the MiniDisc protected against accidental erasure?
" Has the recording level been properly adjusted?
" Is the unit connected properly to the other equipment?
" Is the AC adaptor unplugged or did a power failure oc-
cur whilst recording or editing?
" Is the unit in the hold mode?
" Is the sampling frequency appropriate for recording?
" Is an optical signal being output from the stereo sys-
tem? Read the operation manual for the stereo system.
The battery cannot be charged.
" Is the rechargeable battery in the unit?
" Is the terminal dirty?
Group functions cannot be used with the group-record-
ed MD.
" TOC information may have been changed with other
equipment.
The operation is unstable whilst the PC and the unit are
connected.
" Are you using the USB cable that was purchased sep-
arately?
The display does not show anything or malfunctions.
" Is the PC out of order?
" Are you using another application with this programme
simultaneously?