Filter
Top Products
87
IM-DR580H
03/10/15 IM-DR580H(E)9.fmIM-DR580H(E) TINSE0568AWZZ
References
-Specifications-
Battery life:
Input sensitivity: Output level:
Stereo 2 times long 4 times long
When using the rechargeable
battery (fully charged) included
with the unit
Continuous
recording:
Approx. 8
hours
Continuous
play: Approx.
27 hours
Continuous
recording:
Approx. 12
hours
Continuous
play: Approx.
36 hours
Continuous
recording:
Approx. 15
hours
Continuous
play: Approx.
42 hours
When using a commercially
available, high capacity, "AA"
size (LR6), alkaline battery
Continuous
recording:
Approx. 8
hours
Continuous
play: Approx.
48 hours
Continuous
recording:
Approx. 15
hours
Continuous
play: Approx.
67 hours
Continuous
recording:
Approx. 20.5
hours
Continuous
play: Approx.
75 hours
When using one, commercially
available, high capacity, "AA"
size (LR6), alkaline battery with
the rechargeable battery (fully
charged)
Continuous
recording:
Approx. 20
hours
Continuous
play: Approx.
80 hours
Continuous
recording:
Approx. 30.5
hours
Continuous
play: Approx.
103 hours
Continuous
recording:
Approx. 40
hours
Continuous
play: Approx.
122 hours
" The above values are the standard values when the unit is used at an ambient temperature of 25°C.
" The continuous recording time is for microphone input when the volume level is set to "VOL 0" and the backlight is set to
"LIGHT OFF".
" The continuous play time shows the value when the volume level is set to "VOL 15" and the backlight is set to "LIGHT OFF".
" The operating time when using an alkaline battery may be different, depending on the type and manufacturer of the battery,
and on the operating temperature.
" "Fully charged" means that the battery is charged for approx. 3.5 hours, and charged for another 2 hours after the battery
indicator disappears.
Reference input
level
Input impedance
MIC H 0.25 mV 10 k ohms
MIC L 2.5 mV 10 k ohms
LINE 100 mV 20 k ohms
Specified out-
put
Maximum out-
put level
Load imped-
ance
Ear-
phones
- 8 mW + 8 mW 32 ohms
Audio out-
put
125 mV (-12
dB)
- 10 k ohms
Speaker
output
125 mV (-12
dB) *1
- 10 k ohms
*1 When the speaker output selector switch of the multi-link
station is set to MD.
9