Filter
Top Products
23
Part1
QUICK START GUIDE
Part2 Part3
Please refer to "Guidance for text programming" on page 13 as for how to entering characters.
When you press an appropriate number key (job code number) and press the
P
key for text entry just after you
start programming with the
s
key, the cash register will automatically be ready for text entry.
Then a little after displaying guidance message indicating what programming you are in, the register may ask
you to enter the first parameter. Referring to the corresponding “Procedure”, enter a parameter and start
character entries.
Clerk names (12 digits)
Logo messages (6 lines and 24 digits for each line)
The register can print programmed messages on every receipt. On the standard model, a 6-line logo message is
printed on the receipt. If you want to print in other logo message format, please change the format. For the
programming details, refer to page 66. The options are listed below:
* “Header 3-line message” type: 1 to 3
“Header 6-line message” type: 1 to 6
“Header 3-line and footer 3-line message” type: 1 to 6 (1 to 3 as header, 4 to 6 as footer)
@
*Line number
(1-6)
Character keys
(max. 24 digits)
As
To keep the current setting
To program another line
s4P
CLERK NAME PROG.
ENTER CLERK NO.
_
CLERK NAME PROG.
DAVID_
ENTER CLERK NO.
0.00
s
5
P
1
@
DAVID
s
A
PrintOperator displayKey operation example
s@
To program another clerk
Character keys
(max. 12 digits)
Clerk no.
(1-25)
A
To keep current setting
s5P
8
Text Programming
A203_1 Quick Start Guide 06.5.1 7:25 PM Page 23