Filter
Top Products
53
Part3
FOR THE MANAGER
Part2Part1
2. Text programming (Press
s
to skip. / Press
A
to terminate.)
3. Footer print on receipt programming (Press
s
to skip. / Press
A
to terminate.)
4. Entry of amount tendered programming (Press
s
to skip. / Press
A
to terminate.)
LIMIT DIGITS
8
s
(2) Press the
s
key to register the setting.
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
(1) Go to (2) when the entry of amount tendered does
not need to be changed from "NON
COMPULSORY". Otherwise, press
:
key to
display "COMPULSORY".
Each time
:
key is pressed, the display shows
"COMPULSORY" and "NON COMPULSORY"
alternatively. In case of
c
and
b
programming,
"INHIBIT" is displayed instead of "NON
COMPULSORY".
Default setting is "NON COMPULSORY" or "INHIBIT".
AMOUNT TENDERED
NON COMPULSORY
s
(2) Press the
s
key to register the setting.
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
(1) Go to (2) when the footer print on receipt does not
need to be changed from "NO". Otherwise, press
:
key to display "YES".
Each time
:
key is pressed, the display shows
"YES" and "NO" alternatively.
Default setting is "NO".
This programming decides whether or not the
machine should print a message at the foot of a
receipt when a specified key is used. With regard
to programming method of footer logo message,
refer to "Logo messages" section on page 23.
FOOTER PRINT
NO
s
(3) Press the
s
key to register the text.
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
CHEQUE
CHEQUE
(2) Enter the text.
A maximum of 16 characters can be entered.
Please refer to "Guidance for text programming" on
page 13 for entering the text.
When you start entering a character, the current
text data will be overwritten by new data.
Pressing the
P
and
@
key moves the cursor to
the right and left respectively.
ENTER TEXT
CHECK1
:
(1) Press
:
key to enter text programming.
Immediately after displaying guidance message, the
current text data will be displayed.
A203_3 FOR THE MANAGER(SEEG) 06.5.6 8:08 PM Page 53