Filter
Top Products
50
6. Discount calculation (for the subtotals) programming (Press
s
to skip. / Press
A
to terminate.)
7. Percent rate limit programming (Press
s
to skip. / Press
A
to terminate.)
8. Terminate programming
Item: Selection: Print:
A Discount calculation Enable* 0
(for the items) Disable 1
B Discount calculation Enable* 0
(for the subtotals) Disable 1
C Always 0 is printed. 0
From left, ABC
Text
Percent rate
Percentage rate limit
Sign
Print
0.00
A
(1) Press the
A
key to terminate the
%
key
programming.
%2 PROGRAMMING
ENTER[00]KEY
s
(2) Press the
s
key to register the setting.
In the case of programming for the
%
key, the
display shows "%2 PROGRAMMING". Go to step 2
to program the
&
key.
In the case of programming for the
&
key, the
display shows "ENTER[TL/NS]KEY". Go to step 8.
90.00
90.00
(1) Enter percent rate limit using numeric key.
The rate limit can be set from 0.00 to 100.00.
Default setting is 100.00.
% HALO PROG.
100.00
s
(2) Press the
s
key to register the setting.
Immediately after displaying guidance message for
the next step, the current setting for the next step
will be displayed.
(1) Go to (2) when the discount calculation for the
subtotals does not need to be changed from "SBTL
ENABLE". Otherwise, press
:
key to display
"SBTL DISABLE".
Each time
:
key is pressed, the display shows
"SBTL DISABLE" and "SBTL ENABLE" alternatively.
Default setting is "ENABLE".
A203_3 FOR THE MANAGER(SEEG) 06.5.6 8:08 PM Page 50