Filter
Top Products
_ _ _ J_lo_/€_
• I R-904_(A) E_O 09Z007:R-904_(A) 2009-Z0-Z4 o$ Z:53 ..... :I,>,_
. The table below describes the options available on the
"Settings" screen.
Option
Name Option Type Description
Network Wired, Accordingto your home network
Wireless connection,choose it.
ChoosingAuto would enable
IPSettings Auto, Static DHCPservice, oryou can set it to
static. By default,the Autois set.
Following fields have to be set manually if the IP Settings is
set to static.
The IP address of the VuNow
IP Address IP address
Pod.
Subnet Mask Subnet mask Subnet mask ofyour network.
Gateway Gateway IP IPaddress of the gateway.
address
DNSserver IP
DNS IP address of the DNSserver.
address
Cancel To exit Network.
Save To confirm thesettings.
4. Set the "Network" to "Wired".
5. Set each setting and select "Save" on the
"Settings" screen.
AdvancedWireless Mode
1, Perform the steps 1-3 in "Advanced Wired
Mode" procedure on the previous page.
2, Set the "Network" to "Wireless".
3, Set each setting and select "Next" on the
"Settings" screen.
.Then the next screen appears displaying settings such as
SSID, Security and so on.
4, Select "Scan" to search for available wireless
networks at "SSID" option.
, Then the wirelessnetwork listappears.
5, Select your wireless network.
O. Set each setting and select "Save" on the next
screen.
Upgrading the VuNow Pod from the Vunow
Server
* Ifyou may receive a message to upgrade the VuNow
Service, we recommend that you upgrade your VuNow
Service immediately.
[]Notes:
. It is recommended that you upgrade to the latest version
to enjoy the new features available. Other reason for
upgrading are to fix known security holes and bugs.
. Ifyou do not get the upgrade message, please go to
"Settings" -> "Product Settings" -> "Product Info" and note
down the product ID, client version and server version. E-
mail the data to the contact details provided at
support@VuNow.com