Filter
Top Products
_ _ _ J_lo_y¢_
• I R-904_(A) E_G 09Z007:R-904_(A) 2009-Z0-Z4 o$ Z:53 ..... :I,>,_
/!
System Setup
. The setup menu is displayed on the fluorescent and allows you to perform the setup procedures easily. In most situations, you will
only need to set this once during the installation and layout of your home theater, and it rarely needs to be changed later.
The setup menu consists of 4 main menus; SYSTEM, SET ROOM EQ, SPEAKER SETUP and MULTI ROOM SETUP.
These menus are then divided up into various sub-menus.
1, Turn the setup menu on.
EE3 _ EE3 E]B
ASSIGN -- _RROUNO-- ST_F_E_
SETUP
©
. The setup menu will be shown.
. To turn the menu off, press this button again.
IINotes:
. When the VuNow is selected as an input source, the
system setup cannot be performed.
2, Select the desired menu using the CURSOR UP/DOWN buttons.
. When selecting "SYSTEM", see "SETTING THE
SYSTEM" on page 48.
. When selecting "SET RMEQ", see "SETTING THE
ROOM EQ" on page 49.
. When selecting "SPK SET", see "SETTING THE
SPEAKER SETUP" on page 50.
. When selecting "MLT ROOM", see "SETTING THE
MULTI ROOM SETUP" on page 54.