Sherwood SD-871 DVD Player User Manual


 
11
CONNECTING TO TV WITH SCART CONNECTOR (Regional Option)
You can enjoy DVD Videos by simply connecting this unit to a TV. To hear improved audio sound quality, connect the 2CH
AUDIO OUTPUTs to the AUDIO INs of DVD (, AUX, CD, etc.) of your amplifier/receiver.
To connect these jacks correctly, refer to Connecting 2CH AUDIO OUTPUTs on page 7, Connecting COMPOSITE VIDEO
OUTPUTs 1, 2 and so forth on page 8.
Notes:
If your TV has a monaural audio input instead of stereo, you need to use an optional audio cord which converts stereo audio
output to monaural.
Do not connect the VIDEO OUTs of the unit to the TV through a VCR. Otherwise the image may be disturbed due to the copy
protection function.
CONNECTING TO TV WITH AUDIO AND VIDEO INS
L
R
AUDIO
IN
L
R
AUDIO
IN
Amplifier or Receiver
This unit
S-VIDEO
IN
(COMPOSITE)
VIDEO IN
COMPONENT 1
VIDEO IN
Y Cb/Pb Cr/Pr
COMPONENT 2
VIDEO IN
Cr/Pr Cb/Pb Y
TV, projector, etc.
For some countries like Europe, the unit incorporates the A/V SCART OUTPUT connector.
You can connect the unit to TV easily using the SCART connections without other cumbersome audio and video connections.
During operation of the unit, this connector can deliver either the composite (regular) video or RGB video signals as well as
the audio L and R signals.
Notes:
In this connection, do not connect the unit to the TV through a VCR. Otherwise the image may be disturbed due to the copy
protection function.
According to the video connections between this unit and TV, etc. and the video input source selected on TV, etc., be sure to
set the SCART VIDEO and the SCAN TYPE to the corresponding settings.
When these are not set correctly, no picture or abnormal picture may be displayed. (For details, refer to When selecting the
SCART VIDEO (Regional Option) on page 35.)
A/V SCART IN
This unit
TV