Sherwood SD-871 DVD Player User Manual


 
52
Each time the CURSOR or button is pressed, the
setting menu or the item menu is selected.
The selected setting is colored.
In case of selecting the DEFAULT?, just press the ENTER
button without pressing the CURSOR /buttons.
3
Press the CURSOR button to select the setting menu.
4
Press the CURSOR /buttons to select the preferred, then press the ENTER button.
RCRC
RC
󳂮When selecting the CCS (Cross Color Suppression)
You can remove the color signal component for images in which the color signal component is mixed with the brightness signal.
Set the CCS to your preference:
* HIGH ~ LOW : When removing the color signal component as desired.
* AUTO : When removing the color signal component automatically.
* OFF : When turning off the CCS function.
󳂮When selecting the CHROMA LEVEL
You can adjust the density of the color within the range of -6 ~ 6.
󳂮When selecting the CHROMA DELAY
You can adjust the shift of the brightness signal and the color signal of the image within the range of -2 ~ 2.
󳂮When selecting the ENHANCE V
You can adjust the vertical contour of the image within the range of 0 ~ 11.
󳂮When selecting the ENHANCE H
You can adjust the horizontal contour of the image within the range of 0 ~ 11.
󳂮When selecting the DIGITAL NR (Noise Reduction)
You can reduce the video noise as desired.
Note : The DIGITAL NR setting may have no effect depending on the video source. In such a case, the image may look better
when it is set to OFF.
* HIGH ~ LOW : When reducing the video noise as desired.
* AUTO: When reducing the video noise automatically.
* OFF: When turning off the digital noise reduction function.
󳂮When selecting the DEFAULT?
You can reset all the settings for picture quality made in the CUSTOM VIDEO SETUP menu to the default settings.
Continued
5
Press the CURSOR button to select the item menu.
Each time the CURSOR or button is pressed, the
item menu or the setting menu is selected.
RC