Filter
Top Products
34
When selecting the VIDEO OUTPUT
• You can select the resolution of video signals to be output from the HDMI OUTPUT connector depending on the TV connected
to this unit. (For details on the resolution compatible with your TV, refer to the operating instructions of that.)
• When the HDMI OUTPUT connector is connected to an HDMI-compatible TV, the TV reports to this unit what resolutions it
supports. Therefore, if you select AUTO WITH HDMI, this unit outputs the video signals of the highest resolution acceptable for
your TV.
Notes:
• To output the signals from the HDMI OUTPUT connector, you should set the HDMI OUTPUT to ON. (Refer to “When selecting
the HDMI OUTPUT” on page 33.)
• Some TVs may not report their resolution information. In this case, if you select AUTO WITH HDMI, the video signals of 480p
(or 576p) will be automatically output.
• If the picture is not clear or natural, select the resolution to suit your TV.
When selecting the SCAN TYPE
• The COMPONENT VIDEO OUTPUTs of this unit can be capable of outputting either conventional interlaced video signal or
progressively scanned video signal (that can reproduce high-density pictures with less flicker).
• When the COMPONENT VIDEO OUTPUTs of this unit are connected to the COMPONENT VIDEO INPUTs of TV or projector,
etc., depending on whether the video signal system of your TV or projector, etc. supports the conventional interlacing (simply called
interlaced) video signals or the progressively scanned (simply called progressive) video signals (that can reproduce high-density
pictures with less flicker), you should select the corresponding video signal.
Note:
• When the progressive video signals are input into the non-progressive COMPONENT VIDEO INPUTs of your TV, etc., the picture
may not be shown normally.
Therefore, when the progressive COMPONENT VIDEO INPUTs of TV is not connected to, you should select INTERLACED.
When selecting the TV DISPLAY
• When you connect a normal TV with 4:3 aspect ratio to the unit, select either “4:3 LETTERBOX” or “4:3 PAN-SCAN” and when you
connect a wide TV with 16:9 aspect ratio, select “16:9 WIDE”.
When selecting the TV SYSTEM
• Depending on the countries, this unit conforms to either the NTSC color system for U.S.A, Canada, etc., or the PAL for Europe,
Australia, China, etc.
If the color system of this unit is different from that of your TV monitor and the discs to be played, the screen may be somewhat
hard to see or the picture quality may be poor.
Only in this case, change the video signal format to another.
(For details about the video signal format of your TV monitor or the discs, refer to the operating instruction of your TV or disc’s
jacket.)
• You can select the desired video signal format with pressing the NTSC/PAL button, too.
(For details, refer to “CHANGING THE VIDEO SIGNAL FORMAT” on page 31.)
Continued
• AUTO WITH HDMI : When outputting the video signals of the highest resolution
acceptable for TV from the HDMI OUTPUT connector.
• 480p (576p) : When outputting 720x480p (NTSC) (or 720x576p (PAL) (progressive))
video signals.
• 720p : When outputting 1280x720p (progressive) video signals.
• 1080i : When outputting 1920x1080i (interlaced) video signals.
VIDEO OUTPUT
SCAN TYPE
TV DISPLAY
TV SYSTEM
AUTO WITH HDMI
480p(576p)
720p
1080i
SCAN TYPE
TV DISPLAY
INTERLACED
PROGRESSIVE
• INTERLACED : When outputting conventional interlacing video signal.
• PROGRESSIVE : When outputting progressively scanned video signal.
TV DISPLAY
TV SYSTEM
SCART VIDEO
4:3 PAN-SCAN
4:3 LETTERBOX
16:9 WIDE
• 4:3 PAN-SCAN : DVDs recorded with the 16:9 aspect ratio and the pan-scan
specification are reproduced in the pan-scan screen which
automatically trims the left and right of picture.
• 4:3 LETTERBOX : DVDs recorded with the 16:9 aspect ratio are reproduced in
the letter box screen which has black bands on the top and bottom.
• 16:9 WIDE : DVDs recorded with the 16:9 screen are reproduced by filling the TV screen.
Note: Depending on some DVDs, the playback picture may not conform to the TV aspect
setting you select.
TV SYSTEM
SCART VIDEO
NTSC
PA L
• NTSC : When selecting the NTSC format.
• PAL : When selecting the PAL format.