Sherwood SD-871 DVD Player User Manual


 
30
Some DVDs contain scenes which have been shot simultaneously from multiple camera angles.
For these discs, the same scene can be viewed from each of these different angles.
The recorded angles differ depending on the disc used.
During playback at the scene recorded from multiple camera angles, press the ANGLE button.
During playback at the scene recorded from multiple camera
angles, the angle symbol ( ) is displayed on the TV
screen only when the ANGLE MARK is set to ON. (Refer to
When selecting the ANGLE MARK on page 45.)
Each time this button is pressed, the angle changes as follows:
Example:
Note : This function works only at scenes recorded from multiple angles.
󳂮To select a zoom scale
In the zoom on mode,
Each time the button is pressed,
zoom scale changes as follows
025 PCT 󳃅 050 PCT 󳃅 100 PCT 󳃅 150 PCT 󳃅 200 PCT
zoom-out mode zoom-in mode
CHANGING THE CAMERA ANGLE
Selected angle number
Total number
ZOOMING IN/OUT A SCENE
During playback or in the still
picture or the pause mode,
press the ZOOM button.
1
Each time this button is pressed, zoom scale or zoom
mode changes as follows:
The unit zooms in to the center part of the scene.
󳂵 ZOOM X1.5 󳂵 ZOOM X2 󳂵 ZOOM X3 󳂵 ZOOM OFF
Zoom-in mode Zoom playback off mode
ZOOM X2 󳃅 ZOOM OFF
Zoom-in mode Zoom playback off mode
ZOOM ON 󳃅 ZOOM OFF
To return to the previous operation status, press the
ZOOM button repeatedly until the zoom playback is
canceled.
Notes:
The zoom function may not work with some discs or files.
The zoom function may not work properly at some
scenes.
Zooming is not possible at a title or DVD menu, etc.
Only while zooming in a scene,
press the CURSOR
///
buttons to select the desired
part of the scene.
2
In the zoom-in mode only, you can select and view any part of the scene close-up.
RC
RC
RC
RC