Appendix
D. Handheld Remote Controller
The Handheld Controller provides the capability of adjusting output power remotely
when the SQC-122c is in Manual Mode.
ABORT
Sigma
instruments?
Handheld Controller
To use the handheld controller, attach the cable from the handheld controller to the
Remote jack on the SQC-122c front panel. Select a Process using the SQC-122c front
panel SoftKeys. Press Next Menu until the Auto/Manual SoftKey is displayed. Press
Auto/Manual to change to Manual power mode (SoftKey shows Manual/Auto). Press
Start to begin the film deposition.
You can now use either the front panel Control Knob or the Handheld Controller to
adjust output power. Pressing Abort on the handheld controller stops the layer and
returns output power to 0%.