Filter
Top Products
10
GB
Connections
AERIAL
Rear of TV
SCART INPUT
Tips
Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the
DVD/VCR Receiver
. Use one of the connections
described below.
Please refer to the manuals of your TV, VIDEO,
Stereo System or other devices as necessary to
make the best connections.
Caution
–
Make sure the DVD/VCR Receiver is connected direct-
ly to the TV. Select the correct AV input on your TV.
– Do not connect your
DVD/VCR Receiver
to TV via
your VIDEO. The DVD image could be distorted by
the copy protection system.
Basic connections (AV)
11
Connect the EURO AV1 (TO TV) on the rear panel
of the
DVD/VCR Receiver
to the scart input socket
on the TV using a SCART lead (E).
22
You can connect such a Satellite, Cable or Digital
set top box to the
DVD/VCR Receiver
(D).
Basic connection (RF)
11
Connect the aerial cable (A) from your indoor/ out-
door aerial to ANTENA IN jack on the rear panel of
DVD/VCR Receiver
.
22
Connect the supplied RF cable (R) from the
ANTENA OUT jack on the rear panel of
DVD/VCR
Receiver
to your television’s Aerial Input.
Notes
When you connect the
DVD/VCR Receiver
to your TV,
be sure to turn off the power and unplug both units from
the wall outlet before making any connections.
TV and External (or Set Top Box) Connections
Make one of the following connections, depending on the capabilities of your existing equipment.