Filter
Top Products
Controlling the TV with the Supplied Remote
By adjusting the remote signal, you can control your TV
with the supplied remote.
Notes
If you enter a new code number, the code number
previously entered will be erased.
When you replace the batteries of the remote, the
code number may be reset to the default (SONY)
setting. Reset the appropriate code number.
Controlling TVs with the remote
Press and hold TV @ / 1 while entering your TV’s
manufacturer’s code (see the table) using the num-
ber buttons and press ENTER/OK. Then release
TV @ / 1.
Code numbers of controllable TVs
If more than one code number is listed, try entering
them one at a time until you find the one that works with
your TV.
Manufacturer Code Number
SONY 501
AIWA 553, 501
DAEWOO 504, 505, 506, 507, 515, 544
FISHER 508
GOLDSTAR/LG 503, 511, 512, 515, 534, 544
GRUNDIG 517, 534
HITACHI 513, 514, 515, 544
JVC 516
MAGNAVOX 503, 518, 544
MITSUBISHI/MGA 503, 519, 544
NEC 503, 520, 544
PANASONIC 509, 524
PHILIPS 515, 518
PIONEER 509, 525, 526, 540
RCA/PROSCAN 510, 527, 528, 529, 544
SAMSUNG 503, 515, 531, 532, 533, 534, 544
SANYO 508, 545, 546, 547
SHARP 535
TELEFUNKEN 523, 536, 537, 538
THOMSON 537, 539
TOSHIBA 535, 540, 541
ZENITH 542, 543
Controlling the TV
You can control your TV using the buttons below.
By pressing You can
TV @ / 1 Turn the TV on or off.
TV/VIDEO Switch the TV’s input source
between the TV and other input
sources.
Note
Depending on the TV, you may not be able to control
your TV or to use some of the buttons above.
REFERENCE
41
GB
TV @ / 1
TV VOL +/–
TV CH +/–
TV/VIDEO
Number Buttons
ENTER/OK