Filter
Top Products
40
GB
Radio Operation (Continued)
Tuning into a Station Manually
11
Press TUNER FM/AM on the remote control until
the frequency band appears on the display and
TV screen.
22
Press TUNER FM/AM on the remote control to
select the desired band.
33
Press TUNING (+/–) on the remote control to
tune in the desired station.
For your reference
Weak FM stations
“STEREO” may flash when the weak FM stereo signal
is received, select another station.
To turn off the radio
Press @ / 1 to turn the DVD/VCR Receiver off or select
another function mode (DVD or VIDEO).
Tuning into a Station Automatically
Hold down TUNING (+/–) on the remote control for 1 or
2 seconds, and a station is searched for automatically.
Note
The search may not stop at a station with a very weak
signal.
Muting
Press MUTING to mute your unit.
You can mute your unit in order, for example, to answer
the telephone, MUTING appear in the display.
RDS Operation
This unit is equipped with RDS (Radio Data System),
which brings a wide range of information to FM radio.
Now in use in many countries, RDS is a system for
transmitting station call signs or network information, a
description of station programme type text message
about the station or specifics of musical selection and
the correct time.
RDS Tuning
When a FM station is tuned in and it contains RDS
data, the unit will automatically display the station’s call
sign and the RDS indicator will light in the Display
Window as well as indicators for the RDS services pro-
gramme (PS) if transmitted by the station.
RDS Display
The RDS system is capable of transmitting a wide vari-
ety of information in addition to the initial call sign that
appears when a station is first tuned. In normal RDS
operation the display will indicate the station name.
Pressing RDS on the remote control enables you to
show the station name.
Note
If the RDS services programme (PS) is not being trans-
mitted, the Display Window will show a PS NONE mes-
sage.