Sony KP-61V90 Projection Television User Manual


 
Connecting a satellite receiver
(SAT) and a VCR
1 Connect the cable from the satellite
antenna to tbe satellite receiver.
2 Attach tbe coaxial cable from the
incoming cable connection or antenna to
VHF/UHF IN on the VCR.
3 Using a coaxial cable, connect VHF/UHF
OUT on tbe VCR to VHFiUHF on tbe
projection TV.
4 Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
satellite receiver to AUDIO and S VIDEO
IN on the VCR.
5 Using AUDIO and S VIDEO* cables,
connect AUDIO and S VIDEO OUT on the
VCR to AUDIO and S VIDEO IN on the
projection TV (White-AUDIO Left, Red-
AUDIO Right).
*if your VCRis not equipped wilh S VIDEO, use a
VIDEO cable (yelIow) instead of the SVIDEO
cable,
To view input from the satellite receiver or
VCR, select the video input which your
satellite receiver or VCR is connected to
by pressing TV/VIDEO on the remote
controh
$ V_OEO
Disconnect all power sources before making any connections.
{R_r of pr*_i_tion ?V}
3
Ye_'_5W_aV {not _appni_}