Filter
Top Products
Connecting a DVD Player (Upper
illustration)
Using an AUDIO and S VIDEO cables,
connect AUDIO and SVIDEO IN on the
projection TV to AUDIO and S VIDEO OUT
on the DVD Player (White-AUDIO Left, Red-
AUDIO mght).
Connecting a DVD Player with
component video output
connectors (Lower illustration)
1 Using an AUDIO cable, connect AUDIO of
LINE OUT on the DVD Player to AUDIO of
VIDEO 4 IN on the projection TV (WNte-
AUDIO Left, Red-AUDIO Right).
2 Using three yellow VIDEO cables, connect
Y, Pl_,and PRof COMPONENT VIDEO
OUT on the DVD Player to Y, PE_.and PR of
VIDEO 4 IN on the projection TV.
Notes:
• Since fhe high quality pictures on a DVD
disc contain a lot of information, picture
noise may appear. In [hks case, adjust "Noise
Reduction" ill the Video menu. (see "Noise
Reduction" on page 26)
• Some DVD Player termh'mls may be labeled
differently. If so, connect as follows:
Connect Y (green) to Y,
Connect Pn (b_ue) to C,, Cb or B Y,
Connect Pl_(red} to C_, Cr or R Y.
• This prNectlon TV does not support
progressive scan DVD players output, Please
use the interlaced output,
Disconnect aft power sources before making any connections.
DV[$
_VD Player
directly to the projection TV,
Conrle_ing the DVD Player
through other video
equipment will tause
unwanted picture noi_e.