Filter
Top Products
Press VOLUME to continue.
Ca_ : [C*_+ I
NI_ [C,H /
4 Press CHANNEL + to preset channels
automatically.
CHANNEL ,P
A_LO Program
B kvN
"Auto Program" appears and the
projection TV starts scanning and
presetting channels automatically. While
scanning, the received channel will be
displayed on the sub screen. When all the
receivable channels are stored, the lowest
numbered channel is displayed.
To perform AUTO SET UP again
F_ _ WfVIDE_
ooooo E] 1]
_T_P t_u @ 4F
Press SET UP inside the drop-down panel on
the projection TV and perform steps 2-4
above.
Press SET UP again to exit.
Adjusting the Convergence
Automatically (FLASH FOCUS)
The projection tube image appears on the
screen in three layers (red, green and blue). If
they do not converge, the color is poor and
the picture blurs.
Before you use your projection TV, be sure to
adjust the convergence.
The FLASH FOCUS feature allows you to
adjust the convergence automatically.
• It is z_commended to per[onn FLASH FOCUS about
30 mimKes a/Jet the projection TV is fi_t tamed on.
• You ca_ alsoper/otto FLASH FOCUS using the Set
Up menu on p_'_ge35.
Press FLASH FOCUS.
The cross pattern appears and FLASH
FOCUS begins to work. The adjustment is
completed when the cross pattern becomes
white.
EitoE!t
NO_LSH FOCUS is canceled if you
perform any other function while FLASH
FOCUS is working.